Forum Posts

Leading Coating
Aug 03, 2022
In AN AFTER WORKOUT FORUM
It is different from the general mixing furnace, generally should meet the following three requirements: 1. It can control the temperature of the liquid metal during drawing, so that the molten metal is always maintained within a certain temperature range, so as to ensure the normal production of continuous casting and the best quality of the ingot.Vacuum Heat Treatment Furnace For Molds 2. The furnace is required to vibrate back and forth within a certain range. For certain alloys, horizontal continuous casting must be vibrated to obtain good ingot surface quality and crystalline structure. The amplitude range is 0-15 mm, and the vibration frequency is 0-200 times per minute.Copper wire workshop design and vacuum heat treatment 3. The front of the furnace body should be easy to install the mold, so that the liquid metal in the furnace can directly enter the mold in a short distance.Casting Vacuum Heat Treatment Process Therefore, the holding furnace is made into a horizontal power frequency induction furnace with an iron core with a slightly square body. This kind of furnace can be tilted and rotated and cannot be tilted. Although the structure of the tiltable furnace is more complicated , but can prevent the danger of liquid metal shock during leakage.The Function And The Production Of Ceramic Bulletproof Vest
0
0
1
Leading Coating
Aug 02, 2022
In AN AFTER WORKOUT FORUM
A roasting stove is a stove used in southern winters to keep warm.C/C composite brake material Also known as electric oven, electric fire bucket, foot warmer, etc.! It can be widely used in various civil and public buildings such as residences, offices, hotels, hospitals, schools, and simple mobile houses. It mainly sends warmth in the form of far-infrared radiation and thermal diffusion. Also known as electric oven, electric fire bucket, foot warmer, etc.! Vacuum Brazing Technology of Static Guide Vane RingIt can be widely used in various civil and public buildings such as residences, offices, hotels, hospitals, schools, and simple mobile houses.
0
0
1
Leading Coating
Aug 02, 2022
In AN AFTER WORKOUT FORUM
1. This type of drying box should work indoors and be installed smoothly. 2. The power input should be equipped with a dedicated front-level on-off switch and connected to a good ground wire.Vacuum Heat Treatment Of Aluminum Alloys News 3. Take in baking objects: Do not hit the part of the temperature controller that extends into the studio to prevent damage to the temperature controller and cause failure. 4. When it is newly purchased or put aside for a long time, it should be baked at a low temperature of 80-100 ℃ for two hours before starting to increase the temperature, so as to facilitate the leakage of moisture, enhance the insulation performance and prolong the life of the porcelain parts.Vacuum Heat Treatment For Parts Production
0
0
1
Leading Coating
Sep 28, 2021
In AN AFTER WORKOUT FORUM
VACUUM FURNACE Metallurgical industry: The vacuum technology used in the metallurgical industry includes molten steel vacuum processing, vacuum melting, vacuum induction melting, induction shell melting, vacuum arc remelting, etc. Among them, the vacuum treatment of molten steel is a very important aspect of the metallurgical industry. This technology is mainly used in the atomic energy industry, aerospace technology, ocean drilling technology, gas engine technology, automobile industry, aircraft manufacturing, high-speed trains and other high-tech industries to control and process certain elements in steel, and to The life and reliability of materials put forward higher and higher requirements. The Effect Of Carbon Concentration On Mechanical Properties After Carburizing Heat Treatment Electronics and microelectronics industry: Microelectronics technology requires smaller and smaller electronic components and circuits, and higher integration requirements. This is inseparable from the application of vacuum technology, especially the microfabrication technology of VLSI. The formation of geometrical structure, ultra-thin layer growth technology, and particle beam injection technology all require a high-quality and clean vacuum environment, which shows its development Dependence on vacuum technology and equipment. The Role Of Preheating Before Welding And Heat Treatment After Welding
0
0
1

Leading Coating

More actions